P300X2 Punch 300 Watt 2-Channel Amplifier

$199.99


Description

The Punch P300X2 is a 2-channel stereo amplifier capable of producing 150 Watts into each channel at 2-Ohms. The P300X2 amplifier is great with full-range or component systems and can be bridged for use with smaller subwoofers.

The P300X2 is a solid choice if you’re looking to drive a pair of coaxial speakers, component speakers, or a single subwoofer. The amplifier can also be run in stereo/mono mode simultaneously when using passive crossovers (not supplied) on all speakers. With proven PUNCH technology, the P300X2 delivers real Rockford Fosgate power from a small design and is flexible to accommodate any moderately sized system.

  • High level input capable with Auto Turn-On circuit
  • RCA pass-thru outputs
  • Features C.L.E.A.N. Set-up
  • Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
  • 12dB/octave Butterworth crossover
  • On-board Punch EQ with +18dB boost @ 45Hz
  • Muted turn on
  • Stealth top mounted control panel
  • Cast aluminum heatsink
  • Short circuit protection
  • Over current protection
  • 1 Year Warranty
CEA-2006 Compliant
CEA-2006 GuidelinesCEA-2006 Power Rating
100W x 2 @ 4Ω
≤1.0% THD+N
 
Number of Channels
2
 
Total Power
(Sum of Rated Power)
300 Watts
 
Rated Power
(RMS Continuous Power)
100 Watts x 2 @ 4-Ohm
150 Watts x 2 @ 2-Ohm
300 Watts x 1 @ 4-Ohm Bridged
 
Dynamic Power
(PVC/PowerCube®)
120 Watts x 2 @ 4-Ohms 0° Res
203 Watts x 2 @ 2-Ohms 0° Res
 
Bridgeable
Yes
 
Frequency Response
20Hz-20kHz
 
Input Sensitivity
150 mV – 12 V
 
Circuit Topology Class
Class A/B
 
Efficiency (average)
69% @ 4-Ohm
 
Total Harmonic Distortion (THD+Noise)
4-Ohm: <1.0%
2-Ohm: <1.0%
 
Signal Input
Hi/Low Level: 1 RCA Pair
 
Signal Output
Low Level: 1 RCA Pair
 
Tone Controls
0dB to +14dB @ 12.5kHz
0dB to +18dB @ 45Hz
 
Crossover Controls
High-Pass: 50Hz – 250Hz @ 12dB/Octave Butterworth
Low-Pass: 50Hz – 250Hz @ 12dB/Octave Butterworth
All-Pass: Yes
 
Remote Controls
Optional Punch Level Control (PLC2) Ready
 
Visual Indicators
Power/Protect/Thermal LED
Input Clip LED3
Output Clip LED1,2,3LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD

 
Power Wire Gauge
8 AWG to 4 AWG
 
Power Input Connector
Captive C-Clamp
 
Speaker Wire Gauge
8 AWG to 18 AWG
 
Speaker Output Connector
Captive C-Clamp
 
Cooling
Convection
 
Heatsink
 
Operating Voltage
9 – 16 VDC
 
Recommended Fuse
(not included)
50 A
 
Average Current Draw (13.8V Music)
23 A
 
Max. Current Draw (13.8V Sinewave)
45 A
 
Suggested Alternator
75 A
 
Dimensions (H x W x D)
2.38 x 7.76 x 9.86 (in)
6.05 x 19.71 x 25.04 (cm)
 
Shipping Weight
9.5 Lbs. (4.3 Kg.)