P300X1 Punch 300 Watt Full-Range Mono Amplifier

$199.99


Description

The Punch P300X1 is a mono amplifier capable of producing 300 Watts into a 2-Ohm load. The P300X1 full-range frequency response makes it perfect for a subwoofer system or for powering a dedicated center channel speaker.

The P300X1 is perfect for use as a dedicated subwoofer or center channel amplifier. Regardless if you’re driving multiple speakers or just one, the hefty 2-ohm capability will deliver the right amount of PUNCH that you want! Now, thanks to its small chassis design, it will also fit where traditional amplifiers cannot.

  • High level input capable with Auto Turn-On circuit
  • RCA pass-thru outputs
  • Features C.L.E.A.N. Set-up
  • Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
  • 12dB/octave Butterworth crossover
  • On-board Punch EQ with +18dB boost @ 45Hz
  • Muted turn on
  • Stealth top mounted control panel
  • Cast aluminum heatsink
  • Short circuit protection
  • Over current protection
  • 1 Year Warranty
CEA-2006 Compliant
CEA-2006 GuidelinesCEA-2006 Power Rating
200W x 1 @ 4Ω
≤1.0% THD+N
 
Number of Channels
1
 
Total Power
(Sum of Rated Power)
300 Watts
 
Rated Power
(RMS Continuous Power)
200 Watts x 1 @ 4-Ohm
300 Watts x 1 @ 2-Ohm
 
Dynamic Power
(PVC/PowerCube®)
260 Watts x 1 @ 4-Ohms 0° Res
444 Watts x 1 @ 2-Ohms 0° Res
 
Bridgeable
No
 
Frequency Response
20Hz to 20kHz +/- 1.0dB
 
Input Sensitivity
150 mV – 12 V
 
Circuit Topology Class
Class A/B
 
Efficiency (average)
74% @ 4-Ohm
 
Total Harmonic Distortion (THD+Noise)
4-Ohm: <1.0%
2-Ohm: <1.0%
 
Signal Input
Hi/Low level: 1 RCA pair
 
Signal Output
Low Level: 1 RCA Pair
 
Tone Controls
Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
Function depends upon LP/AP/HP switch position
 
Crossover Controls
High-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
Low-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
All-Pass: Yes
 
Remote Controls
Optional Punch Level Control (PLC2) Ready
 
Visual Indicators
Power/Protect/Thermal LED
Input Clip LED3
Output Clip LED1,2,3LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD

 
Power Wire Gauge
8 AWG to 4 AWG
 
Power Input Connector
Captive C-Clamp
 
Speaker Wire Gauge
8 AWG to 18 AWG
 
Speaker Output Connector
Captive C-Clamp
 
Cooling
Convection
 
Heatsink
 
Operating Voltage
9 – 16 VDC
 
Recommended Fuse
(not included)
50 A
 
Average Current Draw (13.8V Music)
23 A
 
Max. Current Draw (13.8V Sinewave)
45 A
 
Suggested Alternator
75 A
 
Dimensions (H x W x D)
2.38 x 7.76 x 9.86 (in)
6.05 x 19.71 x 25.04 (cm)
 
Shipping Weight
9.5 Lbs. (4.30 Kg.)