P1000X5 Punch 1,000 Watt Class-bd 5-Channel Amplifier

$499.99


Description

The Punch P1000X5 is an ultra-efficient 5-channel amplifier capable of running your entire system without excessive drain on your charging system. The P1000X5 is perfect for running a front/rear system and a dedicated subwoofer.

The P1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels and run subwoofer(s) off the 5th channel! Known world-wide for brute power, this amplifier offers a higher level of efficiency along with a tri-stage protection that covers thermal, over-current and short circuits.

  • High level input capable with Auto Turn-On circuit
  • Features C.L.E.A.N. Set-up
  • Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
  • 12dB/octave Butterworth crossover
  • On-board Punch EQ with +18dB boost @ 45Hz
  • Muted turn on
  • Stealth top mounted control panel
  • Cast aluminum heatsink
  • Short circuit protection
  • Over current protection
  • Infrasonic filter
  • 2/4 channel input switch
  • 1 Year Warranty
CEA-2006 Compliant
CEA-2006 GuidelinesCEA-2006 Power Rating
75Wx4 + 150Wx1 @ 4Ω
≤1.0% THD+N
 
Number of Channels
5
 
Total Power
(Sum of Rated Power)
1000 Watts
 
Rated Power
(RMS Continuous Power)
75 Watts x 4 +
150 Watts x 1 @ 4-Ohm125 Watts x 4 +
300 Watts x 1 @ 2-Ohm

N/A +
500 Watts @ 1-Ohm

 
Dynamic Power
(PVC/PowerCube®)
115 Watts x 4 +
299 Watts x 1 @ 4-Ohms 0° Res190 Watts x 4 +
540 Watts x 1 @ 2-Ohms 0° Res

N/A +
863 Watts x 1 @ 1-Ohm 0° Res

 
Bridgeable
Yes (front/rear channels)
 
Frequency Response
Front/Rear: 20Hz – 20kHz +/-3dB
Sub: 20Hz – 500Hz +/-3dB
 
Input Sensitivity
150 mV – 12 V
 
Circuit Topology Class
Class A/B + Class BD (Sub)
 
Efficiency (average)
Front/Rear: 66% @ 4-Ohm
Sub Channel: 80% @ 4-Ohm
 
Total Harmonic Distortion (THD+Noise)
<1.0%
 
Signal Input
Input Switch: Hi/Low level input
Input Switch: 2/4 channel input
Hi/Low Level: 3 RCA Pair
Sub: front/sub input switch
 
Signal Output
 
Tone Controls
Sub:
0dB to +18dB @ 45Hz
 
Crossover Controls
Front: 50Hz – 250Hz High-Pass @ 12dB/Octave
Rear: 50Hz – 250Hz High-Pass @ 12dB/Octave
Sub: 50Hz – 250Hz Low-Pass
Sub: 28Hz infrasonic filter @ 12dB/Octave
 
Remote Controls
Optional Punch Level Control (PLC2) Ready
 
Visual Indicators
Power/Protect/Thermal LED
Input Clip LED3
Output Clip LED1,2,3LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD

 
Power Wire Gauge
4 AWG
 
Power Input Connector
Block
 
Speaker Wire Gauge
12 AWG
 
Speaker Output Connector
Block
 
Cooling
Convection
 
Heatsink
 
Operating Voltage
9 – 16 VDC
 
Recommended Fuse
(not included)
150 A
 
Average Current Draw (13.8V Music)
75 A
 
Max. Current Draw (13.8V Sinewave)
150 A
 
Suggested Alternator
100 A
 
Dimensions (H x W x D)
2.38 x 7.76 x 15.03 (in)
6.05 x 19.71 x 38.18 (cm)
 
Shipping Weight
15.3 Lbs. (6.93 Kg.)