M600-5 Prime Marine 600 Watt 5-Channel Amplifier

$539.99


Description

The M600-5 is a 600 watt marine grade “all-in-one” amplifier featuring four full-range stereo channels and a dedicated mono subwoofer channel.

The Prime M600-5 is a 600 Watt amplifier specifically designed for Marine and Motorsport applications through its 2-part epoxy coated Printed Circuit Board (PCB). The four stereo channels feature Class-A/B topology and the dedicated subwoofer channel runs on high efficiency Class-D. High level and low-level RCA inputs allow for flexibility and the on-board Punch EQ, built-in 12dB crossovers, and independent gain controls permit precise tuning. Real time output and thermal sensing along with current and short circuit protection protect the amplifier under adverse conditions.

  • Class A/B technology (4 channel)
  • Class-D technology (sub channel)
  • Remote Punch Level Control (sub channel) included
  • RCA and high level input with 2/4/5 channel select
  • 12 dB/Oct Butterworth crossovers
  • On-board Punch EQ with +18dB boost @ 45Hz
  • Separate Front, Rear and Sub gain control
  • Real time output and power supply thermal sensing
  • Cast aluminum heat sink
  • 4 Gauge power/ground connectors
  • MOSFET power supply
  • Over current and short circuit protection
  • Marine grade two part epoxy coating on circuit boards
  • Muted turn on
  • 2-Year Warranty
Rated Power
(RMS Continuous Power)
50W x 4 + 200W x 1 @ 4-Ohm
75W x 4 + 300W x 1 @ 2-Ohm
150W x 2 @ 4-Ohm Bridged
 
Number of Channels
5
 
Bridgeable
Yes (front/rear channels)
 
Tone Controls
Front: 0/6/12dB @ 45Hz
Rear: 0/6/12dB @ 45Hz
Sub: Variable 0dB to 12dB @ 45Hz
 
Signal Input
High Level: 2x 4-pin MOLEX
Low Level: 3 RCA Pair
 
Signal Output
 
Power Wire Gauge
4 AWG
 
Speaker Output Connector
Block
 
Heat Sink Type
Cast Aluminum
 
Cooling
Convection
 
Remote Controls
Punch Level Control: When connected is linked to “gain control” to provide remote output level
 
Visual Indicators
Power
Protect
 
Circuit Topology Class
Class A/B + Class D (Sub)
 
Frequency Response
20Hz to 20kHz +/-1dB
 
Dimensions (H x W x D)
1.98″ x 6.77″ x 13.99″
(5cm x 17.2cm x 33.5cm)
 
Shipping Weight
9.1 Lbs. (4.12 Kg.)
 
Dynamic Power
(PVC/PowerCube®)
57W x 4 + 221W x 1 @ 4-Ohm
90W x 4 + 390W x 1 @ 2-Ohm
178W x 2 @ 4-Ohm Bridged
 
Efficiency (average)
Channels 1/2/3/4: 64% @ 4-Ohm
Sub Channel: 85% @ 4-Ohm
 
Total Power
(Sum of Rated Power)
600 Watts RMS
 
Crossover Controls
Front Channels: HP/LP Variable 50Hz – 250Hz @ 12dB/octave
Rear Channels: HP/LP Variable 50Hz – 250Hz @ 12dB/octave
Sub Channel: LP Variable 50Hz – 250Hz @ 12dB/octave
 
Power Input Connector
Block
 
Speaker Wire Gauge
12 AWG
 
CEA-2006 Compliant
CEA-2006 GuidelinesCEA-2006 Power Rating
50Wx4 + 200Wx1 @ 4Ω
≤1.0% THD+N